国产天堂在线视频观看,亚洲网站午夜,欧美色中文字幕97精品在线观看,欧美日韩一级二级

  • 中文版
  • 英文版
Your Current Location: Home > Products >> Glue
  • Glue

Glue

Use of XJ-101
XJ-101 is a one-component silicone rubber and metal, nylon, ABS, PC, PVC plastic hot compression molding agent, is a high-temperature curing type, high strength after curing, film flexibility, water resistance, media resistance, aging resistance. After coating, it has a long adhesion time.
Suitable for peroxide type silicone (silicone watch band) and metal (stainless steel, copper, aluminum, etc.), nylon, PET, ABS, PC, PVC plastic hot vulcanization bonding.
Hotline

+86 183 6235 7257

Product Details
Use of XJ-101
       XJ-101 is a one-component silicone rubber and metal, nylon, ABS, PC, PVC plastic hot compression molding agent, is a high-temperature curing type, high strength after curing, film flexibility, water resistance, media resistance, aging resistance. After coating, it has a long adhesion time.
       Suitable for peroxide type silicone (silicone watch band) and metal (stainless steel, copper, aluminum, etc.), nylon, PET, ABS, PC, PVC plastic hot vulcanization bonding.

Technical specification
Appearance: colorless transparent liquid
Nonvolatile content: 5%
Main components: anhydrous ethanol 80% modified polydimethylsiloxane 5-10% silane coupling agent 5-10%

Packing
1, First toluene or ester solvent to remove the sticky surface of the oil and dust (please shake well when using).
2, After the solvent has evaporated, brush a layer of adhesive evenly on the surface of the metal to be adhered.
3, Exposed to the solvent completely evaporated (25 ℃ when about 120 minutes or more), or into the oven 100 ℃ baking 15-30 minutes. Low-temperature platinum vulcanizing agent silicone into the oven 75 ℃ baking 15-30 minutes (sticky nickel-plated need to 180 ℃ baking 20-30 minutes), until the adhesive to be sticky surface of the adhesive curing film. (If the baking temperature is too low or poor heat transfer, you can also extend the baking time)
4, Remove the workpiece cooled to room temperature, the unvulcanized silicone rubber and its paste, has been coated with adhesive products can be placed for 3 days.
5, will fit the compression parts into the model after hot pressing molding, vulcanization temperature within 200 ℃ is appropriate. (The bonding process varies slightly depending on the vulcanization process used for the raw material of silicone rubber).

Storage and precautions
1, This product is best stored at 25 ℃ below low temperature refrigeration.
2, This product contains organic solvents, must be stored and transported in accordance with the rules of flammable products, when used, pay attention to ventilation and prevent contact with open flames.
3, After the glue is used, it should be covered at any time to avoid solvent evaporation.
4, Glue tools can be used oil brush, brush, knives, wood, etc., after use can be immersed in toluene or ester solvents to clean.
5, The effective storage shelf life of this product for six months, after the shelf life of the inspection, can still continue to use.


Notes:

Since we cannot predict and control the circumstances and conditions under which the above information and products will be used, we cannot accept responsibility for any damage, injury or loss of any kind that may result from the use of the above information.
For more detailed information, please contact one of our product engineers who will be available to talk to you.

Hotline

+86 183 6235 7257
主站蜘蛛池模板: 滕州市| 黑龙江省| 桂阳县| 武川县| 庄河市| 东明县| 罗江县| 洱源县| 洮南市| 霍州市| 呼和浩特市| 阿坝县| 仁布县| 十堰市| 信宜市| 舒城县| 吕梁市| 北宁市| 屏东市| 青铜峡市| 且末县| 武平县| 湘潭县| 西华县| 沽源县| 新蔡县| 武冈市| 黑山县| 台江县| 房山区| 侯马市| 宜城市| 北票市| 岐山县| 平昌县| 徐汇区| 华容县| 新干县| 马鞍山市| 兰考县| 临夏县|